Bộ giải mã xung điện từ ezABSO Pulse
Hãng sản xuất: NSD Corp
Ứng dụng sản phẩm: Dầu khí, Hàng Hải, Ngành Thép, Ngành xi măng
TrinhSTC
live:.cid.32dc366d67c3df36ezSCOPE là bộ cảm biến trực quan. Kết nối hai dây tín hiệu cảm biến với ezSCOPE, để lấy tín hiệu từ cảm biến truyền tới PC qua USB. Dữ liệu có thể hiển thị trên màn hình PC theo thời gian thực với các giá trị dạng số và dạng sóng. Thiết bị cũng có chức năng sao lưu dữ liệu. Độ dài dây tín hiệu từ cảm biến đến ezSCOPE có thể được tùy chọn. Vì kết nối đầu vào ezSCOPE được cách điện, nên sẽ không ảnh hưởng đến khả năng hoạt động của cảm biến.
Configuration
Up to 42 slave units can be connected for CC-Link.
Up to 124 slave units can be connected for PROFIBUS.
(If 32 or more slave units are connected, please use a repeater.)
Power supply lines are omitted in this figure.
EZA-MA[1]-01T
[1]Communication specification
| Code | Specifications |
|---|---|
| CCL | CC-Link |
| PRB | PROFIBUS-DP |
EZA-MA[1]-01C
[1]Communication specification
| Code | Specification |
|---|---|
| EIP | EtherNet/IP |
| Item | Specifications | |
|---|---|---|
| Model | EZA-MACCL-01T EZA-MAPRB-01T |
EZA-MAEIP-01C |
| Power supply voltage | 10.8 ~ 28.8VDC | |
| Current consumption | 240mA or less (at 12VDC) 120mA or less (at 24VDC) |
300mA or less (at 12VDC) 150mA or less (at 24VDC) |
| Vibration resistance (JIS C 60068-2-6) | 200m/S2 | |
| Shock resistance (JIS C 60068-2-27) | 2,000m/S2 | |
| Ambient operating temperature | -20 ~ +80℃ No condensation | -20 ~ +75℃ No condensation |
| Ambient storage temperature | -20 ~ +90℃ No condensation | -20 ~ +90℃ No condensation |
| Mass | Approx. 0.5kg | |
Mechnical Specifications
| Item | Specifications |
|---|---|
| Model | EZA-MACCL-01T EZA-MAPRB-01T EZA-MAEIP-01C |
| Position detection format | Electromagnetic Induction Type |
| Shaft diameter | 10mm |
| Protection rating | IP66 (IP64 for sensor shaft during the operation) |
| Permissible shaft load | Radial：40Ｎ Thrust：20Ｎ |
| Permissible mechanical speed | 6,000r/min (continuous operation) |
| Linearity error | 0.03°（±0.015°） |
| Material | Body：Aluminum Shaft：Stainless |
| Moment of inertia | 1×10-6kgm2 |
| Starting torque | 0.02N･m |
Encoder Performance
| Item | Specifications |
|---|---|
| Model | EZA-MACCL-01T EZA-MAPRB-01T EZA-MAEIP-01C |
| Total number of turns | 8,778 |
| Number of divisions | Max. 2,301,100,032 divisions (8,778-turn x 262,144) ※262,144 is the number of divisions per turn. |
| Output code | Binary code |
| Moniter function | ezSCOPE |
Communication Specifications
| Item | Specifications | |
|---|---|---|
| Model | EZA-MACCL-01T | EZA-MAPRB-01T |
| Interface | CC-Link Ver.1.10 | PROFIBUS-DP (V0) |
| Baud rate | 10M/5M/2.5M/625k/156k [bps] | 9.6k/19.2k/45.45k/93.75k/187.5k /500k/1.5M/3M/6M/12M [bps] （Automatic Baud Rate Identification） |
| Number of stations occupied | 1 station | |
| Stations type | Remote device stations | Modular device |
| Item | Specifications | |
|---|---|---|
| Model | EZA-MAEIP-01C | |
| Communication | Physical layer | Ethernet 10Base-T, 100Base-TX, ISO/IEC 8802-3 |
| Number of communication ports | 2 (connector: M12) | |
| Communication speed *3 | Auto-Negotiation (100Mbps / 10Mbps) | |
| Communication method *3 | Auto-Negotiation (Full-Duplex / Half-Duplex) | |
| Communication cycle time (RPI) *1 | 2ms to 3200ms | |
| EtherNet/IP CIP protocol | CIP Conformance Test CT-16 Device Level Ring (DLR) |
|
| EtherNet/IP CIP profile | Encoder Profile | |
| Recommended cable | CAT-5e STP straight cable | |
| Cable length *2 | Between nodes: Max. 100m | |
| Function | IP address setting | Setting by the switch setting (Class C) or receiving it from BOOTP or DHCP server automatically (Class A, B, and C) |
| Communication setting (Speed and method) |
Automatic setting by auto-Negotiation (with communication setting switch) |
|
| Max. number of I/O connections | 3 units | |
| Monitor function | Web server | |
*1 The RPI setting value is limited when using with several masters.
*2 The cable might not extend to 100m according to the connection status or environment.
Check the maximum cable length by asking a cable manufacturer or checking the following document;
- EtherNet/IP Media Planning and Installation Manual [PUB00148R0]
(Download the above manual from the ODVA website.)
*3 The communication method can set to fix to 100Mbps/Full-Duplex by the communication setting switch (SW).
