Ms ThảoCodes Giá Trị - ListCodes#1-230326
jprohq 1 100% Australia Origin - Saimo-Vietnam - SaimoVietnam - Saimo Viet Nam
Saimo Vietnam - Saimo Digital-Feeder-Controller Vietnam - Saimo-FeederController-Vietnam - Saimo digital Feeder Controller Vietnam
Saimo model 6105-S5P-6000 (6105P) digital Feeder Controller
Saimo Panel Mount digital Feeder Controller, a micro computer driven instrument specially designed for weigh feeder application
• Microprocessor based integrator with count rates to 200,000 counts/hr.
• Multilevel password protection, provides parameter security and operator access.
• 320 x 240 pixel LCD display with 115mm X 86mm display area.
• Membrane keyboard entry of all calibration data with menu-driven prompting from the display, for easy data entry and operation.
• Auto zero is performed by a push of a key (or remote pushbutton) to zero the scale.
• Auto span is performed by a push of a key to calibrate the scale.
• Solid state pulse output gives one pulse per each increase of the least significant digit of total.
• Optional, alarm contact outputs for load, speed or rate and system failure are available with optional solid state relays.
• Self diagnostics to confirm proper operation of the system.
• Expansion slots for optional analog or digital communication requirements.
• Panel Mount, IP55.
• Power Required, 115/230 VAC, 50-60Hz, 25 VA, switch selectable.
• Includes provisions to electronically simulate a loaded belt.
• The Feeder Controller is equipped with an indication system. Indication can be in the form of
- Status Indications
- Process Alarms
- Programmable Errors
- Equipment Failure
• Includes CPU Card, 2 channels Load Cell A/D Card, 8 Outputs and 6 Inputs of
Digital I/O Card, analog I/O card with 1 input and 2 outputs
• Printing Function: Periodical and under command prints can be obtained by connecting a serial printer to an optional communication board
• Communication (optional) Rs232 or RS 485 communication interfaces, 10M field
bus as Ethernet, Profibus etc..
<3 jprob 1 100% Germany Origin
Leuze Vietnam - jpot16
Code : Leuze GSU 14D/66.3-S12 - SPARE PART
Leuze Ultrasonic forked sensor, Application: Detection of non-transparent + transparent labels Label width: 10 mm, Gap: 2mm, 12-30VDC, M12x5pin connector, 2x Push/Pull outputs, IP 65, 0 ... 60 °C, Teach button, IP65, Diecast zinc housing
2 100% Germany Origin
Leuze Vietnam
Code : PRK18B.T2/4P-M12
Leuze Polarized retro-reflective photoelectric sensor, Operating range limit: 0...4.8m, 10-30VDC, PNP light/dark switching, M12 4pin connector, Multiturn potentiometer, -40...60°C, IP67/IP69K, Autocollimation, Detection of highly transparent bottles/glass/foil
Có thể thay thế cho item 1
Tuychon
3 100% Germany Origin
Leuze Vietnam
Code : GSU14E/LGT.3-M12
Leuze Ultrasonic fork sensor, Detection of transparent labels + non-transparent labels, Teach input, 18-30VDC, Manual fine tuning of the switching threshold, 2 x Push-pull outputs, IO-Link, 2,000 Hz, M12 5pin connector, 0 ... 60 °C, IP65
<3 jprob 1 100% Finland Origin
Vaisala Vietnam
INDIGO80 A0N1A1A0
Handheld Indicator
Power supply unit: USB-C Cable only, no AC-adapter
No Indicator Accessories
No Connection Cables for Transmitters
Connection cable for probe: M12-M12 Probe Connection Cable 272075SP
Carrying case: Weatherproof Carrying Case for Indigo80 and HMP80 and DMP80 Series Probes ASM214759
Housing colour option grey
SW version with SI units only (Japan market requirement)
2 100% Finland Origin
Vaisala Vietnam
HMP80 N0E1S0
Handheld Dew Point Probe
Probeset: Probe with Range [-70 ... +60°C Td], DRYCAP®180M sensor
Thread: Mechanical connection, ISO G1/2'' thread
M12-M12 Probe Connection Cable 272075SP
Filter option for probe head
Accessories for ISO G1/2'' thread No Accessories
Multilingual Quick Guide
Standard factory calibration
<3 jprob 1 100% Korea Origin - jprohq - AC&T-Vietnam - AC&Tvietnam - AC&T Viet Nam - jpot26
AC&T Vietnam - AC&T Vietnam - AC&T Vietnam - AC&T Vietnam - jpro3
Model: ETOS-500XP - Computer Ser. - IPC
AC&T Industrial Network Server ETOS
Single CPU, RS422/485 : 8 Ports
Dual Power : Free 100 to 240 VAC
ETOS-500XP-SCPA: Ethernet 2Ports (10/100/1000Base-TX) / (Ethernet
Connection No.: Max 128 channels)
ETOS-500XP-BAS: ETOS-500XP Series Case
ETOS-500XP-PWR: ETOS-500XP Series Power Module (Free Voltage,100~240V,60Hz)
ETOS-500XP-S04: RS422/RS485 4Ports (connector type : Pin terminal)
ETOS-500XP-NUL: EmptySlot Cover
<3 jprob 1 100% Korea Origin - jprohq - AC&T-Vietnam - AC&Tvietnam - AC&T Viet Nam - jpot26
AC&T Vietnam - AC&T Vietnam - AC&T Vietnam - AC&T Vietnam - jpro3
AC&T ETOS-500XP - Computer Ser. - IPC
AC&T AC&T Industrial Network Server
<3 jprob 1 100% US Origin - PERMA-PURE Vietnam - PERMA-PURE-Vietnam
PERMA PURE Vietnam - PERMAPURE Vietnam - PERMA-PURE Viet Nam
P/N: PD-200T-24MSS - Pure Nafion Gas Dryer 200
200 Tubes, 24" length, machined stainless steel fittings and shell
Máy sấy khí Nafion tinh khiết PD-200T-24MSS PERMA PURE
100% US Origin, PERMA PURE Vietnam,
Model: PERMA-PURE PD-200T-24MSS Perma Pure Nafion Gas Dryer 200
1trong 2 option
<3 jprob 1.1 100% UK/EU Origin
Positek Vietnam - Positek-Vietnam - Positek Vietnam - Positek-Sensor for gas Vietnam - jpro2
Model: Positek X111.600AI1000NSUZ375 Sensor for gas
Positek Intrinsically Safe ATEX/IECEx (Ex ia )certified LIPS® Sensor for gas/vapour atmospheres
1.2 100% UK/EU Origin
PositekVietnam - Positek Viet Nam - Positek Vietnam - Positek Sensor for gas Vietnam - jpot24
Positek Model: X111.600AI1000NSUZ375 Sensor for gas Positek
Positek Intrinsically Safe ATEX/IECEx (Ex ia )certified LIPS® Sensor for gas/vapour atmospheres
<3 jpro 1 100% Switzerlamd Origin
Tantronic VietNam
Model: 20-12-35000-A
Tangasflow 2026net 0-100% LEL
Analyser for the measurement of explosive gas with an integrated pump. Indication of the gas concentration and the alarm status.
The activation of the integrated solenoid valve block for the automatic zero point and/or sensitivity calibration. The system can be adapted to all customized requirements simply with the password protected menu structure. The configuration of the alarm organization is very simply realized with the integrated alarm matrix. Compared to the Tangasflow 2016net, these status messages are also shown on the Tangasflow 2026net by means of a colored display backlighting. The device status is thus even more clearly and quickly visible. The new display has a higher resolution which is improving its readability.
Technical data
Type of device: TangasFlow 2026net
Power input: 24VDC Max.
Consumption: 20W
Temperature range: 0°C to +50°C (short-term 60°C)
Relative humidity: <99% RH, non-condensing
Tantronic Interface: 1x 14 Pin round connector Contains analog and digital outputs Contains power supply lines
- Analog output: 1x Analogue output (optionally up to 250 Ohm)
4-20mA for the measurement value 2.5mA to indicate the calibration
process
- Digital output: 1x 3 Logic signal for alarm 1-3 1x Logic signal for calibration status 1x Logic signal for warning 1x Logic signal for fault
Ethernet Interface: 1x 10/100Mbit/s, RJ-45
Measuring sample input: Bulkhead connection, 6mm / Serto-Fitting, 4mm
Measuring sample output: Bulkhead connection, 6mm
Zero input: Bulkhead connection, 6mm / Serto-Fitting, 4mm
Span input: Bulkhead connection, 6mm / Serto-Fitting, 4mm
Data recorder: For max. 4000 events
Temperature recorder: For max. 4000 events (1x per 2h)
Display: 160 x 104 Pixel Colored RGB LED backlight to display alarms and warnings
Sensor
NDIR-sensor Nondispersive infrared sensor
- Type of gas: Methane CH4
- Measuring range: 0-100% LEL
- T90 response time: <10s (CH4)
- Accuracy: ±2% FS (Full Scale)
- Stability: ±2% / Year
- Zero-drift: ±2% / Year (daily Auto-Zero calibration)
- Warm-up time: 30min
Enclosure
Housing type Aluminium housing Colour Powder-coated RAL 7035 / 5002 Type of protection IP65
Batbuoc
1.1 100% Switzerlamd Origin
Tantronic VietNam
Model: 80-12-34540-A
Programming TangasFlow 2026net Sensor 1 KKS CYQ01CQ212 (0-100% V3.23)
2 100% Switzerlamd Origin
Tantronic VietNam
Model: 20-10-35200-A
*note: replace for 00-92-35200-A
Analys 2026net
Analyser with up to 16 measuring points for the measurement of toxic or explosive gas or oxygen with a pump-bypass system.
Indication of the gas concentration and the alarm status. To actuate the pre suction pump block. To actuate the solenoid valve block with separately pre suck and sample drawing. The system can be adapted to all customized requirements, simply with the password protected menu structure. The configuration of the alarm organization is very simply realized with the integrated alarm matrix.
Compared to the Analys 2016net, these status messages are also shown on the Analys 2026net by means of a colored display backlighting. The device status is thus even more clearly and quickly visible. The new display has a higher resolution which is improving its readability.
Technical Data
Type of device: Analys 2026net
Power input: 24VDC
Max. Consumption: 15W
Temperature range: 0°C to +50°C (short-term 60°C)
Relative humidity: <99% RH, non-condensing
Tantronic Interface: 2x D-Sub 37 Contains analog and digital in- and
outputs
- Analog output: 1x Analog output, one for each connected measuring device (optionally up to 250 Ohm): 4-20mA for the measurement value
- Digital output: 3x 3 Logic signal for alarm 1-3 16x Logic signal for the solenoid
valve block
x Logic signal for the pre-suction
pump block
1x Logic signal for calibration status 1x Logic signal for warning 1x Logic signal for fault
Ethernet Interface: 1x 10/100Mbit/s, RJ-45 Serial Interface: 1x RS-232, D-Sub 9
Measuring sample input: Bulkhead connection, 6mm
Measuring sample output: Bulkhead connection, 6mm
Data recorder: For max. 4000 events
Temperature recorder: For max. 4000 events (1x per 2h)
Display: 160 x 104 Pixel Colored RGB LED backlight to display alarms and warnings
Sensor
NDIR-sensor: Nondispersive infrared sensor
- Type of gas: Methane CH4
- Measuring range: 0-100% LEL - T90 response time: <10s (CH4)
- Accuracy: ±2% FS (Full Scale) - Stability: ±2% / Year - Zero-drift: ±2% / Year (daily Auto-Zero calibration)
- Warm-up time: 30min
Enclosure
Housing type: 19“ Rack version Painting: Aluminium blank Type of protection: IP20
Batbuoc
2.1 100% Switzerlamd Origin
Tantronic VietNam
Model: 80-10-34513-A
Programming Analys 2026net with 12MP CYQ01CQ211 (V3.23)
3 100% Switzerlamd Origin
Tantronic VietNam
Model: 20-14-35100-A
Tanguard 2026net
Tanguard 2026net is the modern microprocessor based gas warning device to monitoring and alerting of toxic and explosive gases and steams for up to eight measuring points into compact 19'' inch rack. The system can be adapted to all customized requirements simply with the password protected menu structure.
The attitudes for the attached gas transmitters are made with the internal keyboard. The configuration of the alarm organization is very simply realized with the integrated alarm matrix.
Compared to the Tanguard 2016net, these status messages are also shown on the Tanguard 2026net by means of a colored display backlighting. The device status is thus even more clearly and quickly visible. The new display has a higher resolution which is improving its readability.
Technical data
Type of device: Tanguard 2026net
Power input: 24VDC
Max. Consumption: 12W
Temperature range: 0°C to +50°C (short-term 60°C)
Relative humidity: <99% RH, non-condensing
Tantronic Interface: 2x D-Sub 37 Contains analog and digital in- and
outputs
- Analog input: 8x Analog input, one for each connected measuring device (optionally up to 250 Ohm): 4-20mA for the measurement value 2.5mA to indicate the calibration
process
- Analog output 8x Analog output, one for each connected measuring device 4-20mA for the measurement value (optionally up to 250 Ohm)
- Digital input 8x Logic signal for flow fault, one for each connected measuring device
- Digital output 8x 3 Logic signal for alarm 1-3 1x Logic signal for calibration status 1x Logic signal for warning 1x Logic signal for fault Ethernet Interface: 1x 10/100Mbit/s, RJ-45
Serial Interface: 1x RS-232, D-Sub 9
Data recorder: For max. 4000 events
Temperature recorder: For max. 4000 events (1x per 2h)
Display: 160 x 104 Pixel Colored RGB LED backlight to display alarms and warnings
Enclosure
Housing type: 19“ Rack version Painting: Aluminium blank Type of protection: IP20
Batbuoc
3.1 100% Switzerlamd Origin
Tantronic VietNam
Model: 80-14-34512-A
Programming Tanguard 2026net 1 GT13E2 KKS CYQ01CQ218 (V3.23)
Sensor 1 ExHaust Air Duct S1 KKS CYQ01CQ212 (0-100% LEL, A.L1-3 6/10/15% LEL)
Sensor 2 Ignitiongas Sensor KKS CYQ01CQ281 (0-100% LEL, A.L1 20% LEL)
Sensor 4 Power Supply 1 (24V DC)
4 100% Switzerlamd Origin
Tantronic VietNam
Model: 00-92-35311-B
Filter Element Polyglas-R small size (Set of 6 pcs.)
Important Notice: Item 00-92-35311-A is replaced withitem 00-92-35311-B and it is 100% compatible. Item 00-92-35311-B is the new revision and it is much better than revision A with much more filter area and can be used in both ways (input and output).
<3 jpro6 1 100% USA Origin
Temposonics Vietnam / MTS Vietnam - jpot8 - jste
Code: RDVCE0150M01H021S1123G8
Temposonics® R-Series V RDV Detached Sensor Electronics
C -> Housing Style -> Threaded flange M18×1.5-6g (A/F 46)
E -> Mechanical -> PUR cable with M16 connector, 1150 mm length D6, side entry
