Speed Upgrade 150%
Input:Capacitive humidity sensor & Pt100
Output:Standard RS-485 & 1 analog output
Linear accuracy:±2 dp°C(at +25°C)±(0.02%F.S. / °C)
Operating range of dew point:-60 ... +60 dp°C
Max. Scaling range:Dew point:-100 ... +60 dp°C
Pressure resistance:16 bar
●Additional option:( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation:3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA
Model : eYc THS88 Plus 

Input type:Capacitive humidity sensor & Pt100
Operating range of dew point:-60 ... +60 dp°C
Max. scaling range:Dew point:-100 ... +60 dp°C
Dew point switch to another physical quantity range:Frost point:-60 ... 0 fp°C;Absolute humid.(Volume)0 ... 50000 ppm/v;Absolute humid.(Weight)0 ... 50000 ppm/w
Output signal:Standard RS-485 & 1 analog output / 0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V / 0 ... 10 V
Signal connection:3-wire
Modbus:Standard RS-485 & 1 analog output
Linear accuracy:±2 dp°C(at +25°C)±(0.02%F.S. / °C) (Operating range of dew point:-60 ... +60 dp°C)
Load resistance:Current output:Max.500 Ω;Voltage output:Min.10 KΩ
Output calibration (ZERO & SPAN) adjustment range:Software
Response time t90 (Temp. at+25°C):<20 sec
Power supply:DC 8 ... 35 V&AC 10 ... 30 V
Current consumption:DC 24 V, 50 mA
Electrical connection:M12 connector
Medium:Air
Operating Temp. for housing:-40 ... +60°C
Operating Humid. for housing:0 ... 95%RH (Non-condensing)
Operating Temp. for probe:-40 ... +60°C
Storage temperature:-25 ... +60°C
Pressure resistance:16 bar
Installation:Metal connector
IP rating:IP65(Probe:IP20)
Electrical protection:■ Polarity protection ■ Over-voltage ■ Short-circuit
Housing:S.S.(SUS304)
Probe:S.S.(SUS304);SUS sintered filter(SUS316)
Weight:233 g
Factory setting
Measuring range of dew point:-100 ... +20°C
Output:4 ... 20 mA& standard RS-485